Cricut’s Print Then Cut area is smaller than the paper because the printer has to fit Cricut’s sensor marks around your design. How much smaller depends on the machine and paper size. The figures below come from Cricut’s help article “How large can I Print Then Cut?”, checked October 2026 (the page shows an August 2026 edit).
Print Then Cut size limits by paper size
Cricut lists a maximum vertical and a maximum horizontal for each paper. Here they are as height × width with the page in portrait, as of October 2026.
| Paper | Explore and Maker series | Venture | Joy Xtra | Joy 2 |
|---|---|---|---|---|
| Letter 8.5 × 11 in | 9.94 × 7.44 in (25.25 × 18.9 cm) | 9.94 × 7.44 in | 9.94 × 7.44 in | 9.94 × 3.19 in |
| A4 210 × 297 mm | 10.62 × 7.2 in (26.98 × 18.3 cm) | 10.62 × 7.2 in | 10.62 × 7.2 in | 10.62 × 3.07 in |
| Legal 8.5 × 14 in | 12.94 × 7.44 in (32.87 × 18.9 cm) | 12.94 × 7.44 in | not listed | not listed |
| Tabloid 11 × 17 in | 15.94 × 9.94 in (40.49 × 25.25 cm) | 15.94 × 9.94 in | not listed | not listed |
| A3 297 × 420 mm | 15.44 × 10.64 in (39.2 × 27 cm) | 15.44 × 10.64 in | not listed | not listed |
| 12 × 12 in | not listed | 10.94 × 10.94 in | not listed | not listed |
Cricut Venture also has entries for 9 × 12, 11 × 11, 12 × 18, 13 × 19, A2, 24 × 12 and 24 × 28 in material; check Cricut’s table if you have one. The original Cricut Joy can’t do Print Then Cut at all.
Three caveats Cricut states itself
- It is not a full rectangle. Cricut says “the cuttable area on any given page size is not a full rectangle or square”, and that a design using the maximum vertical size “may not be able to utilize the maximum horizontal size”. Cricut doesn’t publish the shape of the reserved corners.
- Not every paper your printer takes is supported. The list for your machine is under Settings, Print Then Cut Settings in Design Space.
- Print from Design Space. Cricut says printing a saved PDF outside Design Space “will result in incorrectly sized cut sensor marks”, and asks you not to use “fit to page” or “shrink to fit” in the printer driver.
Choosing a sticker sheet for your printer
The paper size you pick in Design Space has to be one your printer can feed and one your Cricut supports. Cricut’s advice is to “choose a page size that is compatible with your printer, and matches the actual piece of material you plan to use.” To see the sizes your machine allows, open the Design Space menu, then Settings, Print Then Cut Settings; only sizes that work with your machine selection are listed. Make sure the machine selected on the Canvas is the one you will cut with, because the limits change with it.
Tabloid and A3 need both a printer that takes those sheets and an Explore, Maker or Venture; Joy Xtra and Joy 2 are listed for Letter and A4 only.
Why the 6.75 × 9.25 in figure is everywhere
A 2021 Cricut blog post says: “The maximum image size for Print Then Cut is 9.25″ x 6.75″ (23.5cm x 17cm).” That post is still online, and the figure was copied into countless tutorials and template packs. The help center now lists larger, per-machine values, so the old number is no longer the limit on current machines.
It is still useful. A 6.75 × 9.25 in rectangle is smaller than both listed maximums for Letter and A4 on every Print Then Cut machine except Joy 2, and because Cricut doesn’t publish the shape of the reserved corners, a margin of a fraction of an inch on each side is the conservative choice. If a full sheet at 7.44 × 9.94 in triggers a size warning, this is the rectangle to fall back to.
What happens when an image is too big
Design Space doesn’t refuse the job outright. When a printable design is larger than the cuttable area for the page size you have selected:
- a warning icon appears next to the image in the Layers panel;
- on desktop, clicking it offers Auto-Resize, which shrinks the image proportionally until it fits, or Change Page Size, which opens the settings so you can pick a larger supported paper;
- on iOS and Android the warning offers Auto-Resize; to keep the size, change the default under Settings, Print Then Cut Settings, Default Size.
For stickers, Auto-Resize is the option to avoid. It shrinks the whole sheet, so a 2 in sticker might come out slightly smaller than 2 in and your listing size no longer matches. Rebuild the sheet at a size that fits instead.
If you only want to cut and not print, Cricut suggests switching the Operation from Print Then Cut to Basic Cut, which removes the size limit but also drops all printed color.
How many stickers fit in each area
This is where the limits matter for a sticker seller. The counts below come from Gridback’s stickers-per-sheet calculator with a 1/8 in (3.2 mm) gap between stickers. “Letter” means a plain 8.5 × 11 in sheet with 0.25 in margins, for a print shop or a printer-cutter, shown for comparison.
| Sticker size | Letter (print shop) | Cricut 7.44 × 9.94 in | Cricut 6.75 × 9.25 in |
|---|---|---|---|
| 1 in square | 63 | 48 | 48 |
| 1 in round | 68 | 60 | 50 |
| 1.5 in square | 30 | 24 | 20 |
| 1.5 in round | 32 | 28 | 21 |
| 2 in square | 15 | 12 | 12 |
| 2 in round | 18 | 15 | 12 |
| 2.5 in square | 12 | 6 | 6 |
| 2.5 in round | 12 | 9 | 6 |
| 3 in square | 6 | 6 | 6 |
| 4 in round | 4 | 2 | 2 |
Round stickers are packed with offset rows, which is why they sometimes beat squares of the same width. Two patterns stand out:
- The bigger Cricut area only helps at some sizes. 1 in, 2 in and 2.5 in squares give the same count in both Cricut areas, so on those sizes you lose nothing by using the safer 6.75 × 9.25 in rectangle.
- Round 1 in and 1.5 in stickers gain the most: 60 vs 50 and 28 vs 21.
Size pages with every layout: 1 in, 1.5 in, 2 in, 2.5 in, 3 in and 4 in.
Building a sheet that fits
Gridback has a preset for each common case, so the exported PNG is already the right size for Design Space:
- Cricut Letter, 7.44 × 9.94 in: the largest Letter area.
- Cricut A4, 7.2 × 10.62 in: the A4 maximum.
- Cricut safe area, 6.75 × 9.25 in: the rectangle to fall back to if Design Space shows a size warning.
Each preset exports a 300 dpi PNG with transparent gaps between stickers, so Design Space finds each sticker’s edge when you upload it as a Flat Graphic. Gridback doesn’t draw Cricut sensor marks; Design Space adds its own marks and bleed when you print. Cricut doesn’t publish the bleed width or mark geometry, so keep the default 1/8 in gap between stickers. The full workflow is in how to make sticker sheets with a Cricut, and the offset and bleed guide covers border sizes.
Bigger sheets: when to use a print shop
If you want the 63 to 68 one-inch stickers a full Letter sheet holds, or sheets larger than A3, a Cricut is not the tool. A printer-cutter at a print shop takes a full Letter, Tabloid or 12 × 12 in sheet with the cut line stored as a spot color in a PDF, as explained in what is CutContour.